VAP film suction bag is an assembly with exhaust function. The unidirectional air-permeable membrane can effectively suck the gas in the infusion system into the assembly and discharge it out of the infusion system; at the same time, it can prevent the resin from penetrating into the assembly. The top layer is a high-barrier vacuum bag film, which effectively prevents the gas sucked in from the unidirectional breathable film from leaking from the top layer. A diversion net is used in the middle to facilitate the air flow. This product is suitable for vacuum infusion molding process. It can draw out the air evenly and quickly and prevent the loss of resin. It is especially recommended to be used in the blade production process.



FeatureClaimTesting Method
ColorBlue/white/green/light yellowVisually
Width(mm)Unidirectional breathable membrane(100-400)GB/T 4666-2009
Vacuum bag film(100-400)
Diversion net(100-400)
Strip width(cm)1.0±0.3Steel ruler

Thickness of rubber strip(mm)

Temperature resistance(℃)≥120

120℃,30min,Visually check whether there is obvious deformation

Note: The specifications and width of the VAP film suction bag, vacuum bag film, and diversion net can be customized according to customer requirements.


The products should be stored in a ventilated, dry, and clean warehouse, stacked neatly, without squeezing deformation or damage to the assembly, no less than 2 meters away from the heat source, and no more than two years of storage.



Leave us a message, we will provide you with the best solution

  • Name:
  • Phone:
  • E-mail:
  • Message:


Unclear, Change another one

* Please fill in the content of the form carefully. The working hours for consultation and reply are: Monday to Friday, 9:00 to 18:00, please wait patiently for the staff to reply.